Αρχική Η εταιρεία Προϊόντα Νέα Προϊόντα Προσφορές Επικοινωνία English
 
- Γενικός κατάλογος προϊόντων
- Μηχανήματα τροφίμων
- Συσκευές και είδη χημείου
- Τυροπυτιές
- Ένζυμα
- Καλλιέργειες
- Επικαλυπτικά για τυριά και αλλαντικά
- Πρόσθετα και εργαλεία τυροκομίας
- Φυσικές χρωστικές
- Συνθετικές χρωστικές
- Είδη ατομικής υγιεινής και καθαρισμού
- Πόρτες και πλαστικές κουρτίνες
- Οικιακή τυροκομία
- Είδη για εργοστάσια κρέατος και αλλαντικών
- Είδη ζαχαροπλαστικής και αρτοποιίας
 

 

 

 

Επιστροφή

Φυγόκεντρος SuperVario-N

This centrifuge stands out due to its exceptional engine smoothness. That it is largely
free of vibration and has swing out butyrometer buckets positively effects the lifetime
of your butyrometers. Correspondingly, good results (reproducibility and comparability)
are assured. For these reasons, the SuperVario-N is often used as a reference
centrifuge for calibration purposes. Due to its versatility, the SuperVario-N is
widely accepted in dairy laboratories. High versatility means free programmability of
rpm, temperature and time (“free mode”) as well as 4 set programs for the following
tests:
Dr. N. Gerber’s method (determination of fat content)
Roese-Gottlieb’s method (determination of fat content, reference method)*
Babcock’s method (determination of fat content)
Solubility (determination of the solubility of powdered milk)
* Operation only possible under observation of respective safety regulations
 

Properties:

Stainless steel housing
Programmable rotor speed from 600 to 1130 rpm
in increments of 10 rpm
(corresponds to a g-value of 77 to 37 2 g)
Programmable heater up to 68 °C in 1°C increments
Programmable centrifugation time from 1 to 99 minutes
Automatic interlocking safety lid
Automatic shut down in case of unbalance
Automatic brake
 

Technical specifications:

Connection values: 230 V/50 ... 60 Hz/1200 VA
Weight, empty: 26 kg
Total height with lid: 46 0 mm
Filling height: 37 0 mm
Rotor speed range: 6 00 to1130 rpm**
Temperature range: room temperature up to 68 °C
** For the determination of fat content due to Gerber’s method, a g-value of 350 g ± 50 g is required.
With a relative centrifugal force (RCF) of 365 g in its unloaded state (idle running) and 340 g in its fully
loaded state, the SuperVario-N fulfils the standard specifications in an exemplary manner.

Επιστροφή